Sumo 60410157 5 Lines 6 Points Green Laser Level Mod (GR-5630)

 The SUMO GR-5630 laser level features 5 laser lines and 6 points, ensuring comprehensive coverage of your work area. The green laser light is precise and highly visible from all angles and at long distances up to 30 meters. It is easy to use with an intelligent chip control panel, providing convenience and speed. The device can rotate 360 degrees and offers fine-tuning for precise angle adjustments, allowing you to set the laser angle as needed.  

• Laser level measuring machine The green laser light is bright and can be clearly seen within a working distance of 30 meters.
• There are 5 laser lines and points (4 vertical lines, 1 horizontal line, 5 points and 1 point on the bottom of the machine).
• There is 1 laser point on the front horizontal line, 1 point on the front and back vertical lines, 1 point on the left and right vertical lines.
• Control panel system with Intelligent chip. All functions can be adjusted quickly with the touch of a finger. Easy and convenient to use
• Vertical laser line button (V)
• Horizontal laser line button (H)
• water level
• Laser beam lock button, alarm off/on, flashing lines
• You can press to change the laser light. between horizontal lines or vertical lines or both lines Vertical lines cut across the ceiling at an angle of 90 degrees.
• laser level measuring machine There is a laser light locking system for setting the tilt angle.
• There is a warning system when the laser level changes more than ±3 degrees. The laser light will flash and there will be a continuous sound warning.
• The laser level can be rotated 360 degrees and can be adjusted in detail by rotating the angle at the base of the machine. to make it more accurate
• Suitable for use in interior decoration. and laying lines inside the building or in the shade, such as flooring and wall tile work Ceiling installation, plumbing work, electrical work, and wood work.
• 1 year product warranty (according to manufacturer's conditions)
• Weight including battery: 1.05 kg.

Technical information

• Laser power : 30mW
• Laser diode : 515 nm
• Laser class : Class II
• Vertical accuracy : 7m±1mm
• Horizontal accuracy : 7m±1mm
• Auto-leveling range : ±3 degree auto leveling
• Horizontal angle : 120 degree
• Vertical angle : 120 degree
• Vertical point accuracy : 7m±1mm
• Laser line width : 2mm
• Working range : 30m
• Power supply: Li-ion 18650 2400mA
• Continuous working time (5 lines) : 2-3 hours
• Waterproof (IP rating) : IP54

How to use

1. Insert the battery into the back of the laser level meter.
2. Turn the ON button on the side of the unit. to enable
3. After the device is turned on There will be a green horizontal laser beam lit up at the front. With a red dot on the bottom of the machine This means it is ready to use immediately.
4. Press the V or H button to select the desired mode.

• The V button is a vertical laser light operation system.
• Press the first time, 2 vertical lines will appear at the front and back.
• Press a second time, 2 vertical lines will appear on the left and right side.
• Press a third time to disable vertical lines.
• The H button is a horizontal lighting system.

1. If the laser level measuring machine changes by more than ±3 degrees, adjust the stand so that the water level bubble is in the center of the circle. When you are sure that there is no more warning sound. The laser level meter will work automatically.
• Press the first time, 1 horizontal line will appear.
• Press a second time to disable horizontal lines.
2. To enable the laser beam lock system to set the tilt angle measurement, press and hold the Tilt mode button for 4 seconds.

The equipment in the set includes

• Laser level measuring machine
• Two rechargeable 2,400mah batteries
• Adapter for charging
• Green glasses, 1 piece
• Plastic box for carrying the laser machine
• Tripod size 1.5 meters
• Manual and warranty card