Marton 60319608 Concrete Cutting Machine 16 Inch With Benzine Engine 9 Hp Marton Premium Orange 

MARTON concrete cutters are designed and manufactured with quality steel. There is a guide cutting and a water tank of all models, suitable for use in concrete cutting or road grooving. Equipped with a compact 9 hp engine. It is convenient to use and has 2 wheels for easy transportation. 

• The 16-inch concrete cutter is suitable for use in concrete cutting or road grooving.
• The steel frame around the engine is strong and durable to help prevent shocks.
• The steering wheel can be adjusted up and down the blade. With level lock
• Equipped with a gasoline engine with a power of 9 hp.
• It has a cutting guide and a dust-proof rubber, making it convenient to use.
• Wheel Bearing 2 wheels for easy transportation.
• 30 liter water tank, removable for cleaning.
• Designed with user safety in mind.
• The product is only available for the cutting blade machine, which must be purchased separately.
• 6 months warranty (according to manufacturer's conditions)
• Orange

Technical Data

• Compatible with the engine : 9 hp gasoline
• Compatible with Cutting Blade : 16 inch diamond cutting blade 3 mm thick / Grooved diamond cutting blade 10 mm
• Leveling Steering Wheel : Threaded Type with Level Lock
• Water Tank : 30 Liter Capacity (Removable for Cleaning)
• Wrenches : No. 34 and 27
• Product Dimensions (WxDxH) : 55 x 82 x 93 cm
• Product Weight : 72 kg.

Preparing the appliance before use

1. Fill the engine oil to the required level before each use (the oil level is at the level of the last end of the oil bath).
2. Fill up with gasoline - gasohol except E20-E85
3. Check the platform retaining nuts and nuts for tightness.
4. Start the machine to see if it works normally.
5. Put the oil on the side of the air filter according to the specified limit to trap dust.
6. Fill the concrete cutting blade coolant in the coolant tank.

How to use

1. Start and warm up the appliance to idle for approximately 30 seconds before each use.
2. Replace the coolant valve of the concrete cutting blade.
3. Use your hands to handle the handle. Force the machine to be tight ready to make a concrete face cut.
4. Adjust the level by turning the steering wheel, adjust the height-low

• Cutting deeper, i.e., lowering the blade, by turning the steering wheel clockwise.
• Lifting the concrete cutting blade, e.g. adjusting the height of the blade by turning the steering wheel counterclockwise.

1. Cut the concrete by accelerating the machine gently as needed. Do not accelerate in a surge manner.
2. Use both hands to hold the left-right handles of the machine firmly. The concrete cutter must be slowly moving to the side in the desired direction.
3. Before turning off the engine, slow the engine down for about 30 seconds to 1 minute to allow the engine to release heat vapor.

MAINTENANCE

• Change the engine oil every 100 hours (No. 40 oil).
• Before use, always check the oil level of the engine (the oil level is at the level of the last thread of the oil bath).
• When discontinued, it should be stored in the shade and should not be exposed to the sun or rain.
• Check the belt pulley to ensure that it is always ready for use.
• Some parts have wear and tear over their life, such as throttle cables. Belts, bearings, wheels, etc., should be replaced when they begin to deteriorate with their condition.

Additional Recommendations

• If the device is used for several hours in a row, there should be a 1-hour break for every 3 hours of use, and it should not be used for more than 12 hours in a row.
• Do not add E20 , E85 fuel.
• You should use 4-stroke engine oil Benz No. 40.
• When moving, the fuel tank cap must be raised so that it is facing up at all times, do not lie on its side or lie down.
• Check the grease on the bearings before each use.

Note

• The price does not include the cut slip.
• The price does not include the pick-up fee (for the lifting fee, please contact the after-sales service department at 1308).
• The colors of the products displayed on the website may vary depending on the color display settings of each screen.